---
title: "Extended Vicon Vantage system cables"
canonical: "https://help.vicon.com/space/Vantage/15050830/Extended%20Vicon%C2%A0Vantage%20system%20cables"
format: markdown
---
The following tables list the cables that can be used in an extended Vicon Vantage system and that are in addition to those described in [Simple Vicon Vantage system cables](https://vicon-help.atlassian.net/wiki/spaces/Vantage/pages/15056443).

> Macro (toc)

You can use this information to identify the correct cables and connection points to use when setting up your Vantage system to include third-party devices such as analog capture devices, synchronized output devices, remote triggering devices, and genlock/timecode video devices.

For details of this type of system, see [Extended Vicon Vantage system (add cameras and third-party devices)](https://vicon-help.atlassian.net/wiki/spaces/Vantage/pages/15042313/Example+Vicon+Vantage+systems).

## ViconLock to PoE+ cable

> Macro (scroll-tablelayout)

| **Cable name / part no.** | **Vicon Lock end** | **PoE+ end** | **Description** |
| --- | --- | --- | --- |
| Lock to PoE+ RJ45 cable (Cat 5e)   
Vicon part no: 0470600 | > Macro (inline-media-image)

     
8-pin RJ-45 plug   
(plugs into PoE socket) | > Macro (inline-media-image)

    
8-pin RJ-45 plug | A Vicon-supplied, shielded RJ-45 Standard 1000Base-T Gigabit Ethernet network cable. |

> Macro (scroll-pagebreak)

## ViconLock to third-party devices cables

> Macro (scroll-tablelayout)

| **Cable name / part no.** | **Vicon Lock end** | **Third-party device** | **Description** |
| --- | --- | --- | --- |
| OMNIMATE Signal connector (3.5mm) cable:   
Vicon part no:   
BEH007A D-25-M   
(for AMTI Gen5, MSA-6 and OPT-SC amplifiers)   
  
BEH008A D-15-M   
(for Kistler 9865B amplifiers)   
  
BEH009A D-37-M  
(for Kistler 5233A2 amplifiers)   
  
BEH012A D-15-M   
(for Bertec amplifiers) | > Macro (inline-media-image)

    
Weidmüller connector   
(plugs into Analog Input (8 channels) x8) | > Macro (inline-media-image)

     
Device dependent | Enables cables to connect to the 64 channels of analog capture. Each individual connector allows for eight connections to eight analog sources with their associated grounds.   
A force plate can connect through one connector.   
For information on how to make the connection, see [Add analog capture devices to a Vantage system](https://vicon-help.atlassian.net/wiki/spaces/Vantage/pages/15049315). |
| Phono (RCA) cable   
(plus device-dependent plug) | > Macro (inline-media-image)

    
RCA phono plug   
(plugs into Sync Out (GPO) x8) | > Macro (inline-media-image)

   
Device dependent | Enables connection to third-party devices that require synchronization or triggering. |
| Phono (RCA) cable   
(plus device-dependent plug) | > Macro (inline-media-image)

    
RCA phono plug   
(plugs into Remote Control In Start and Stop x2) | > Macro (inline-media-image)

   
Device dependent | Enables connection to third-party devices that can trigger (start and stop) capture. |
| BNC cable | > Macro (inline-media-image)

     
BNC – 75Ω (ohm)   
(plugs into Broadcast Sync (VITC) In) | > Macro (inline-media-image)

      
BNC – 75Ω (ohm) | Enables connection to an external analog video source for genlocking to.   
Analog SD bi-sync video may also carry VITC timecode in. |
| Male to Female XLR cable | > Macro (inline-media-image)

     
XLR plug (male)   
(plugs into LTC (Timecode) balanced In) | > Macro (inline-media-image)

     
XLR plug (female) | Enables the connection of balanced LTC – In.   
Note that for correct operation, a synchronized video signal must accompany this signal. |
| VESA Stereo In cable   
Manufacturer: CUI Inc   
Part no: MD-30 CP-2030-ND   
(Digi-Key part no.)   
VESA standard   
IEC10764105 stereoscopic connection type | > Macro (inline-media-image)

    
3-pin mini-DIN   
(plugs into VESA Sync In) | > Macro (inline-media-image)

    
Device dependent | Enables the connection of VESA Stereo devices for genlocking. |

## Lock to Lock cable

If you want to use an additional Lock in your Vicon Vantage system, you also need the following cable:

> Macro (scroll-tablelayout)

| **Cable name / part no.** | **Vicon Lock end** | **Vicon Lock end** | **Description** |
| --- | --- | --- | --- |
| Lock to Lock synchronizing cable   
Vicon part no: BEH010A | > Macro (inline-media-image)

   
3-pin plug   
(plugs into Link Input/Output) | > Macro (inline-media-image)

  
3-pin plug   
(plugs into Link Input/Output) | Proprietary cable for synchronizing an additional Lock.   
Mini cord connector with 3 male contacts. |