---
title: "Connecting cameras"
canonical: "https://help.vicon.com/space/Tracker310/13929500/Connecting%20cameras"
format: markdown
---
To connect cameras into your Vicon system, you must specify the correct IP address for the network card that is connected to the PoE switch.

> Macro (scroll-ignore)
> 
> To watch how to set up Vicon Vero cameras with Vicon Tracker software, see following video:
> 
> > Macro (widget)

> Macro (scroll-only)
> 
> To watch how to set up Vicon Vero cameras with Vicon Tracker software, see the [Tracker Installation and Training Guide](http://youtube.com/watch?v=2QRl2zzwhRk) on YouTube.


    **To connect the cameras:**


1. Connect the PoE switch to the PC.
2. Access the Windows network connections:
  - Open the **Control Panel**, then click **Network and Internet** and on the right side of the panel, under **Network and Sharing Center**, click **View Network Status and Tasks**; or
  - Click the **Network and Sharing Center** icon on the right of the Windows toolbar and then click **Open Network and Sharing Center**.
3. Right-click on the network card connected to PoE and then click **Properties**.
4. In the **Properties** window, select **TCP/IP**.
5. Click the **Properties** button.
6. In the **Properties** window, click the **Use the Following IP Address** radio button.
7. Enter the following **IP address**: – **192.168.10.1**.
8. Enter the following **Subnet Mask** – **255.255.255.0**.
9. Click **OK**.