---
title: "Addressed issues"
canonical: "https://help.vicon.com/space/Nexus219/673087672/Addressed%20issues"
format: markdown
---
The following issues are a selection of those that were addressed in the latest release of Nexus:

- When you perform a world alignment with an IMU in the system, in the Advanced properties, the Orientation fields are now correctly populated with appropriate values.
- When you attempt a second calibration immediately after an initial calibration, Nexus no longer stops responding.
- When you select Local Vicon System on the System Resources tab and try to change either the Buffer Size or Buffer Reserve properties, Nexus no longer stops responding and does not produce corrupt data.
- If you save changes to the System file, make another change and then activate video calibration mode, you can now successfully click Save Changes and select Start under Mask Cameras or Calibrate Cameras.
- When you stream data from a device with multiple outputs (eg, a force plate) and deactivate a single output, the data for the other outputs is no longer affected.
- When you use force plates and crop the resulting data, the mean and standard deviation displayed on the graph for the selected time period now update as expected.
- The Advanced Gait Workflow model templates are now installed to the correct default folder (*C:\Program Files\Vicon\Nexus2.*##*\ModelTemplates*).
- Capture start on labeling or capture before start is now more reliable when subsampled video is being captured.
- When a Live system is connected, transcoding using a pipeline operation no longer causes Nexus to stop responding when you run the operation.