---
title: "Customize floor grid dimensions and offsets"
canonical: "https://help.vicon.com/space/Nexus216/11601841/Customize%20floor%20grid%20dimensions%20and%20offsets"
format: markdown
---
In addition to the standard square volume layout, Nexus lets you use non-square layouts and offset the center of floor grids.

- A new maximum of 50 m now applies to both the x and y axes.
- You can save customized floor grids for future use.
- Old saved options files will load correctly and transfer their settings to the new parameters.

**To change the floor grid:**

1. In the **Options** dialog box (click **Window** > **Options**, or press F7), select **Floor Grid** and in the **Properties** pane on the right, click **Show Advanced**.
2. In the **Dimensions** section, change the grid size and/offset in X and Y as required.

> ℹ️ **Note**   
> ℹ️ This functionality is available only in Nexus 2.12 and later. Earlier versions of Nexus 2 do not read the files correctly and the floor grid returns to the default size.

If you make the floor grid so large or extend the offsets so far that the grid doesn't render at the far end, you can increase the viewable depth.

**To increase the viewable depth:**

1. In the **Options** dialog box (click **Window** > **Options**, or press F7), click **General View Options**.
2. In the **Properties** pane on the right, click **Show Advanced**.
3. Under **3D View Options**, change the **Viewable Depth Radius** value (default is 20000 mm).