---
title: "Configure a Netgear MS324TXUP switch"
canonical: "https://help.vicon.com/space/Connect/347504932/Configure%20a%20Netgear%20MS324TXUP%20switch"
format: markdown
---
![NetgearMS324TXUP.jpg](media://e548b102-5126-4a99-9d0d-8323f5aa5da9)

To configure a Netgear MS324TXUP managed switch, complete the following steps:

1. Unpack the Netgear switch from its packaging, keeping all packaging, instruction packs, etc.
2. Connect a 230v IEC power cable to the rear of the Ethernet switch.
  The GREEN standby light illuminates on the front panel.
3. Connect the Ethernet cable to the Port labeled **24**.
4. Connect the other end of the Ethernet cable to the PC’s network card.
5. On the PC, set the IP address on the network card to `192.168.0.#`, for example, `192.168.0.1`, subnet mask `255.255.255.0`.
6. On the PC, click on the **Chrome** app icon located on the taskbar.
7. In the address bar, enter `192.168.0.239`.
  The following registration page is displayed:
8. Click **Skip Registration & Access the UI**.
9. In the **Device Admin Password** field, enter `password` and then click **Login**.
10. In the **Change Default Password** dialog, enter the password `Password1`, enter it again in the **Confirm** box, and then click **Submit**.
11. Expand **Switching** by clicking the downward arrow  to display the menu.
12. Under **Switching**, click **Ports**.
13. On the right, click **POE**.
  The **Uninterrupted PoE Configuration **list is displayed.
14. In the **PoE Port Configuration** list, confirm that **Max Power** is set to **60000**.
15. At the top on the right, click **Port Configuration**.
16. In the heading row, click the **Port **check box to select all ports.
17. Confirm all ports have a white tick in a purple box (**mg1~mg24**).
18. Clear the ports **xg25~xg28**, as shown in the following image.
19. If the following error is displayed, click **OK**.
20. In the **Maximum Frame Size** box, enter `10000`.
21. Click **Apply**.
22. Confirm the **Frame Size** is 10000 on all selected ports.
23. To make sure everything is properly configured, connect a Vicon camera to the system and ensure all is working correctly.