---
title: "Configure a 24-port D-Link"
canonical: "https://help.vicon.com/space/Connect/1613576/Configure%20a%2024-port%20D-Link"
format: markdown
---
**To enable jumbo packets:**

1. Change the IP of a port connected to the D-Link to `10.90.90.91`.
2. In a browser window, go to [http://10.90.90.90](http://10.90.90.90).
3. Leave the user name and password blank and click **Login**.
4. Set all the ports to be Class 0, PoE-enabled. To do this:
  1. On the tree at the left of the page expand **System Configuration**, then **PoE**, and then select **PoE Port Settings**:
  2. In the **From Port** field, select **01**, and in the **To Port** field, select **24**.
  3. Ensure the **State** field is set to **Enabled** and the **Power Limit** field to **Class 0**.
  4. Click the **Apply** button.
5. To configure the jumbo packets:
  1. On the left, expand **System Configuration**, then **Port Configuration** and then **Jumbo Frame Settings**.
  2. Select the **Enabled** option and then click **Apply**.
6. You must save these settings so they are retained after the switch is power cycled. To do this:
  1. Near the top-left of the page, click on the **Tools** dropdown menu and select **Reboot System**.
  2. Select the **Yes** option for saving the settings and then click the **Reboot** button.
    The switch takes a minute or so to reboot fully.
7. To make sure everything is properly configured, connect a Vicon camera to the system and ensure all is working correctly.